Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It's subtle, doesn't have key fobs or LED indicators and is hidden within the vehicle's wiring.
The user can also deactivate the system temporarily using Transport Mode when renting their car. This guide will walk you through the installation of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning, and relay attacks. The system connects directly to your vehicle's ECU and is secured by a unique PIN code of your choice. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It isn't able to be disabled using circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. Installers who are approved by Thatcham can assist you with the installation and programing of your Ghost system. They can also recommend a tracking system or alarm to complement your vehicle's protection package.
First, the installer must disconnect the battery to prevent accidental airbag deployment or short circuits. When the battery is disconnected, the installer can safely begin working. Hand tools are the most basic to be used to make precise connections. A multimeter is a great tool to verify electrical values. Cable tie and insulation tape are crucial to ensure connections are secure and keep wiring tidy. The user's manual gives specific guidelines that are specific to the Ghost Immobiliser model you have.
During This Internet site , it's essential to choose an area for grounding that is free of paint and debris. The installer should be sure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. The wires can be connected or soldered, depending on the model. Using a quality connector is recommended to ensure a sturdy and reliable connection.
After the installation is completed, the customer can activate after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. To accomplish this, the customer has to press the service button on the dashboard five times within 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for those who rent their vehicles frequently on platforms like Turo. An immobiliser can cut down on the cost of insurance, as it lowers the chance of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser for those who want to safeguard your vehicle from theft. The device prevents your vehicle from starting even when someone copies or steals your key. This is due to its sophisticated technology that is designed to stop the car's engine from starting without the correct PIN code is entered.
The device connects to the vehicle's CAN bus network which allows it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering to create a unique sequence, which only you know. This makes it impossible for anyone else to start your vehicle. This is the best way to safeguard your pride and joy. It will keep its value intact if you ever want to sell it.
Installing Ghost's immobiliser is straightforward, but you must follow the steps to avoid electrical issues and system malfunctions. You must first locate a power supply of 12V and a suitable grounding for the car's chassis. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors and soldering techniques to ensure an effective connection. Also, ensure that you protect the connections by insulating them by using heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
After the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser works. After you've confirmed that everything is working correctly and you are satisfied, you can place the immobiliser in a safe location in the vehicle. Be sure to cover it well to prevent thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it's a top-quality deterrent for car thieves. It is a superior defense against key cloning, hacking and relay attacks, and it cannot be disabled without knowing the code. The device is also easy to use and can be set into the service valet mode to ensure that your car will not be activated when you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to stop theft of vehicles. It is directly connected to the vehicle's CAN bus and communicates with the ECU which makes it a virtually undetectable addition to your car. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals, but instead uses CAN data to communication with your ECU. It doesn't require any modifications to your existing key fobs.
To utilize the Ghost Immobiliser, simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. Once you've verified this, you're able to start your vehicle and leave in peace.
Once installed, Ghost Immobiliser safeguards your vehicle against hacking or key cloning while protecting its value. If you ever need to surrender your vehicle for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll have to find an energy source that is constant (12V) and a grounding point. Make sure that both are properly insulated and can be touched. It is also recommended to use cable ties to bundle and secure the wires. This will reduce the risk of tampering by potential thieves. To avoid committing mistakes, double-check these points and mark them with a label or tape. Check all connections for signs they're getting worn out. Loose connections can lead to system malfunctions, so be sure that they're firmly in place and securely insulated. Make sure to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit is working properly and that all connections and insulation are safe. Be sure to correct any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your vehicle's ECU to stop unauthorised motor starting. Its cutting-edge technology safeguards your car from key cloning and hacking and other common tactics that thieves employ to steal cars. The Ghost also works in conjunction with other alarm and tracking systems to offer the ultimate vehicle protection. This system's unmatched features and discreet design make it a preferred choice for car lovers and security-conscious motorists alike.
It is essential to follow the procedures for installation to ensure correct integration of the Ghost Immobiliser. Consult the wiring diagram of your vehicle as it will aid you in locating and connecting the wires. After that, you'll need identify the power source and grounding points. Once you've identified these then you'll be required to mark them so that they are easy to locate during the installation process. It's important to use high-quality materials and tools. Basic hand tools can assist to make precise connections and a multimeter can verify electrical values and ensure security. Cable tie and insulation tape ensure that all connections are neat. Finally, a user manual will provide specific instructions tailored to your Ghost model.
It is important to test the system before installing it. Enter the PIN code into the system and then start the vehicle. This will ensure that the immobiliser works as intended and stop unauthorised vehicle starts. It is recommended to complete this procedure regularly as part of your regular vehicle inspections to ensure that the system is operating properly.
After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will guard your pride and joy from potential car thieves. It will ensure that no one is able to take your car away even if they don't have the correct PIN code. The Ghost can also be paired with a Thatcham-approved tracker to detect any attempts at tampering or theft that could lead to the location of your vehicle in the event of it being stolen.
The Ghost can be used on a wide range of vehicles and is compatible with most major brands. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA Registered installer, a certification that guarantees that we adhere to the strictest standards and procedures for installing our products. This guarantees customers as well as insurance companies and law enforcement agencies that installations are done safely and correctly.